Rutabaga Shop
Rutabaga - Our StoryRutabaga Paddlesports: Outdoor Programs for Youth, Adult and Family. Kayaking and canoeing classes in Madison, WisconsinRentalsCanoecopia - The World's Largest Paddlesports ExpoRutabaga Events and Notable DatesRutabaga - Store Hours
COVID-19 Operations Page

North Water

Interior Mount Cockpit Bags

Interior Mount Cockpit Bags
Interior Mount Cockpit Bags
Make use of the area on either side of your seat.
North Water-Interior Mount Cockpit Bags
Item:040374-000107
Price:$78.95
Availability:In Stock
Poly Kit:

Quantity:

Description

These cockpit paniers utilize easy to reach space while out paddling. They fit inside your boat above your knees to make better use of cockpit space.

- Helps keep your deck clear for drier paddling
- Provides secure under deck storage
- Items you may need while on the water are in easy reach
- Northwater's SRB Mounting System makes it easy to detach and reattach via a sturdy side squeeze buckle
- Large #5 YKK zipper with 2 zipper pulls runs corner to corner along the top
- Pelican Scoop zippered opening is designed to keep the contents of the bag from falling out when opened
- Mesh drainage panel

3 Mounting Options:
A) onto the rudder cable housing
B) SRB Mounting System(TM) with quick release buckles
C) Bolt on for Polyethylene kayaks

The 2-3/4" vinyl disks adhere easily to fiberglass and composite boats using vinyl adhesive
For polyethylene kayaks, a bolt-on adaption is available through special order.

Features

  • Dimensions:  14"L x 2.5"W x 6"H
  • Volume: 3.5L
  • Weight: 350g
  • Comes in Pairs
  • Front Mesh Drainage Panel

More Info

INSTALLATION
Read over these instructions thoroughly. If you don't feel comfortable with any of the steps please feel free to call us or North Water. This entire project should be done in a well-ventilated area. Also, poor air circulation within the kayak will cause mineral spirits vapors to linger longer. Installation is quite simple and should only take you about 20 minutes.

You will need a Vinyl adhesive to glue the anchors to your boat. If you are trying to install this in a roto-molded, blow-molded, extruded, or poly kayak; make sure to request the Poly-Hardware kit. No adhesive will stick to these materials. The hardware kit will come with everything needed to bolt the North Water bag to your boat. 

TIP
After you have marked out where the bags are to be attached, suspended the boat inverted; this way you can work in a standing position.